The rudder pedals are three-axis rudder pedals designed for use in all flight simulators for steering the rudder axis and two separate toe brakes.
Availability date:
The RH ROTOR V2 Rudder Pedals thanks to the all metal construction and the use of bearings in all movable mechanisms, the use of cam loading mechanisms for all three axes and non-contact digital sensors for all three axes, the pedals are a durable and very accurate device.
The ability to change the angle of inclination of the pedal lever - 3 positions.
New electronics - After calibration, the calibration values are saved to the device. The lack of auto-calibration allows you to use the pedals without the main spring (or with a weakened main spring), e.g. only with a hydraulic shock absorber. Therefore, if the pedals themselves do not return to the center position, the calibration values will not be affected.
Slaw Device Rudder calibration software (for RH Rotor, RX Viper V3 rudder pedals)
With this software you can calibrate pedals, change axle response curves, set dead zones. Although the pedals are shipped already calibrated in the factory.
With this software you can calibrate pedals, change axle response curves, set dead zones. Although the pedals are shipped already calibrated in the factory.The possibility of installing a hydraulic damper (optional is not mandatory) allows you to feel the operation of the hydraulic device under your feet and makes the pedals even better.
Number of axis | 3 |
Number of bearings | 25 (17+8) |
Pedal angle adjustment | Yes |
Main spring tension adjustment | Yes |
Resolution of digital sensors | 13 bit |
Weight | 8 kg |
No customer reviews for the moment.